JOPSS - Search Results

JAEA Reports

The Uranium waste fluid processing examination by liquid and liquid extraction method using the emulsion flow method

Kanda, Nobuhiro; Daiten, Masaki; Endo, Yuji; Yoshida, Hideaki; Mita, Yutaka; Naganawa, Hirochika; Nagano, Tetsushi; Yanase, Nobuyuki

JAEA-Technology 2015-007, 43 Pages, 2015/03

JAEA-Technology-2015-007.pdf:5.33MB

The centrifuge which has the subtlety information concerning the nuclear nonproliferation used for uranium enrichment technical development exists in the uranium enrichment facilities of Ningyo-toge Environmental Engineering Center, Japan Atomic Energy Agency. This centrifugal is performing separation processing of the radioactive material adhering to the surface of parts by wet decontamination of ultrasonic cleaning by dilute sulfuric acid and water, etc. By removing the uranium contained in waste fluid, generated sludge reduces activity concentration. And the possibility of reduction of sludge processing is examined. For this reason, from the 2007 fiscal year, Nuclear Science and Engineering Directorate and cooperation are aimed at, and development of the extraction separation technology of the "uranium" by the emulsion flow method is furthered. The test equipment using the developed emulsion flow method was tested. And dilute sulfuric acid and water were used for the examination as actual waste fluid. The result checked whether the various performances in Basic test carried out in Nuclear Science and Engineering Directorate would be obtained.

Journal Articles

Primary process of radiation chemistry studied by ion pulse radiolisys

Yoshida, Yoichi*; Yang, J.*; Seki, Shuhei*; Saeki, Akinori*; Tagawa, Seiichi*; Shibata, Hiromi*; Taguchi, Mitsumasa; Kojima, Takuji; Namba, Hideki

JAERI-Review 2003-033, TIARA Annual Report 2002, p.145 - 146, 2003/11

no abstracts in English

JAEA Reports

Determination of neptunium in neptunium-uranium-plutonium mixed oxide fuel by spectrophotometry.

; ; ; ; ; *; *

JNC TN8400 2001-026, 29 Pages, 2001/12

JNC-TN8400-2001-026.pdf:0.99MB

The measurement condition by spectrophotometry was evaluated to measure Np content in MOX fuel containing Np. The Np concentration was obtained by measuring the 727nm absorption peak, after the valence of Np in the sample solution was adjusted to the Np(Ⅳ). The calibration curve showed the linearity up to Np concentration 0.8mg/ml. Though Pu and U quantity were respectively added to the Np solution to 30 times and 60 times of Np concentration, there was no effect to the Np analysis. By using this method, relative standard deviation (RSD) of the analyzed values of Np content for 2%Np - MOX fuel was about 4%. In addition, It was confirmed that the Np content could be measured without separating Np from Pu and U. This method can be sufficiently applied as a quick simple method to analyze Np content in MOX fuel containing Np.

JAEA Reports